Grundig TCM 8720 C, Manual

Page: 13 / 38

ENGLISH 13
First Use
Note
▪
Do not use the appliance before
fully reading the user’s manual.
1
Make sure your device stands up-
right in a balanced, smooth, clean,
dry and non-slip surface.
2 Plug the appliance.
– The appliance will start opera-
tion automatically.
3
Remove the water chamber
A
cap.
4 Fill up the water chamber up to
the max. indicator with water.
Based on your preference, you
can remove the water chamber
completely and fill with water.
– After the appliance gives an out
of water warning, repeat the
process.
5 To make sure the pump and the
water system to be filled with wa-
ter, place the brewing chamber to
its socket. Press 1 serving button,
when the water transfer process is
completed, press the same button
for 3 seconds and end the pro-
cess, then pour the water to the
sink.
Note
▪
This way you will ensure that the
pump inside your appliance to op-
erate as intended
Caution
▪
Repeat this process after you
remove the water chamber and
place it back and before each
brew.
Adjusting the amount
of water based on the
cup size
1 Place the brewing chamber
K
to
its slot
G
.
2
Press 1 serving
C
button.
3 When the water transfer process
is completed, press the same
button for 3 seconds and end the
process, then pour the water to
the cup.
4
If the amount of water poured to
the cup is insufficient or excessive,
adjust the amount of water as
below.
5 To change the amount of water,
remove the brewing chamber if it
is in its slot. Press the two serving
button D for 3 seconds and enter
water adjustment mode.
OPERATION _________________________