ENGLISH
29
USE ______________________________________
3sn
1
2
Place the coffee-making pot
O
into the
left compartment heating surface
N
.
Press the left compartment coffee-ma-
king button for 1 serving
D
.
Once the water pumping process is over,
press and hold the same button for 3 se-
conds to end the coffee-making process
and drain the water inside the coffee-ma-
king pot
O
into your cup.
If the water you have poured into your
cup is too little or too much, press the
cup size adjustment button to set it to
small, medium or large
I
. You can
press the cup size adjustment button
I
to switch between level. Once the
LED of the desired cup size turns on,
end the process.
Note
▪
The cup size LED will show the level to which the product is set. Repeat the water amount adjusting process
when you change the cup size.Repeat the water amount adjusting process when you change the cup size.
Coffee making
1
2
Put the desired amount of coffee and su-
gar (up to 3 servings) into the coffee-ma-
king pot
O
.
Place the coffee-making pot
O
in its slot.
Slightly press the button that is found on
the compartment where you have placed
the coffee-making pot
O
and that shows
the number of servings based on the
amount of coffee you have added.
- The light of the selected button will light
in white.
Once the coffee-making process is com-
plete, an audio warning will be heard and
the LED of the relevant coffee-making but-
ton will flash in white. Once the LED turns
dull white, slightly pull back the coffee-ma-
king pot
O
to remove it and pour the cof-
fee into your cup.
