22 ENGLISH
OPERATION ______________________________
Toasting frozen bread
1
Follow the steps from 1 to 4 at the “Toasting”
section.
2
Press the defrost button
F
.
– The indicator light of the defrost button
F
illuminates and the toasting process begins.
Note
7
When the defrost button
F
is pressed, the
toasting process takes longer than with normal
toasting.
3
The appliance automatically switches off as
soon as the set degree of browning has been
reached.
– The start lever
B
springs back up; defrost
button
F
light go off. The toast slices are
pushed upwards and can be taken out of
the toaster.
Notes
7
To cancel the toasting process before it has fin-
ished, press the stop button
E
. The start lever
B
springs back up and the toast slices can be
taken out of the toaster.
Caution
7
Be very careful when taking the toast slices out
of the toaster as the metal parts of the toaster
and also the bread can become very hot.
4
Disconnect the appliance from the wall socket.
Warming up already
toasted bread
1
Follow the steps from 1 to 4 at the “Toasting”
section.
2
Press the reheat button
G
.
– The indicator light of the reheat button
G
illuminates and the warming up process be-
gins.
3
The appliance automatically switches off as
soon as the set degree of warming has been
reached. The start lever
B
springs back up;
reheat button
G
light go off. The toast slices
are pushed upwards and can be taken out of
the toaster.
Notes
7
To cancel the toasting process before it has fin-
ished, press the stop button
E
. The start lever
B
springs back up and the toast slices can be
taken out of the toaster.
Caution
7
Be very careful when taking the toast slices out
of the toaster as the metal parts of the toaster
and also the bread can become very hot.
4
Disconnect the appliance from the wall socket.
Warming up buns
This toaster is equipped with an external warming
rack
I
.
Notes
7
Do not toast bread and warm up buns at the
same time.
7
Do not warm up toast slices on the warming
rack
I
. The toast slices hinder sufficient ven-
tilation.
7
If you accidentally activate the wrong mode
(defrost instead of reheat or reheat instead of
defrost), then the selected mode must be can-
celled first by pressing the stop button
E
be-
fore you can select the right mode.
1
Put the warming rack on the housing
C
and
place it into the gaps
2
Place the buns on the warming rack
I
.
3
Connect the power plug into the wall socket.
4
Using the browning control
D
select the de-
sired degree of warming.
5
Press down the start lever
B
.
– The indicator light of the stop button
E
il-
luminates and the warming up process be-
gins.
