34
SETTINGS
_______________________________________________________________________________
Contrast levels 1 and 2 (
{
1,
{
2)
Satellites transmit with different video amplitude. This requires an appropriate contrast setting on the
receiver.
The correct contrast levels are factory set.
1
If required, or when re-programming, you can choose between contrast level »
{
1
« and
»
{
2
« for each channel position.
In some exceptional cases you can change the values of the contrast settings, see page 36, section
“Presetting the contrast levels” in the »
3:
/
/
« (Basic set-up) sub-menu chapter.
Decoder settings (
/
)
1
Depending on the decoder used, one of four possible settings can be selected for each individual
channel position with the »
;
;:
:
« buttons.
– – –
decoder off
ǁǁ
– –
only the audio signal is decoded
– –
=
only the video signal is decoded
ǁǁ
–
=
both the audio and video signals are decoded
2
To save all settings, press the »
OK
« button.
– The main menu will re-appear on the screen.
Note:
Reception unit
B
(INPUT
B
) has priorty over use of the »
DECODER
« socket. It will not be pos-
sible to view a channel on reception unit
A
(INPUT
A
) that requires the decoder if the channel on
reception unit
B
(NPUT
B
) also requires the decoder.
Please read the following pages.
?
?
A
003
ʐʐ
11
.
494 GHZ
$
H – A
ʀǁ
7.02 MHz 7.20 MHz
ǁ
~
PANDA BW 1
(
(
–
{
1
/
/
– – –
=
+
Ǻ
/
OK
