Allgemeiner T
eil / Gener
al Section
STR 600 AP
1 - 10
GR
UNDIG
Ser
vice
Operating Hints
This chapter contains excerpts from the operating instructions. For further particulars please refer to the appropriate user instructions the part number of which is indicated in the
relevant spare parts list.
The Receiver at a Glance / Use of the Receiver’
s Controls
Front Side/The Receiver’s Controls
1
Switches the receiver in stand-by and on
again. No disconnection from the mains!
2
Panda Logo*
3
The yellow indication is lit if a Timer is
“active” (the preprogrammed timer time is
elapsing).
4
The red stand-by pilot lamp is lit if the
receiver is in stand-by.
5
The receiver’s display (see description in
next column).
¶
6
This key is protected against inadvertent
actuation. Press it for more than 2
seconds to call up the menu for adjusting
the aeriel motor.
¶
EXIT
Exit menu (without saving).
›
P+
›
P–
– Select programme positions step-by-
step (long pressure: scrolling).
– Switch on from stand-by with last
selected programme position (last sta-
tion memory).
– When in a menu: select a line.
FE
– Change volume. If the volume is very
low, “Vol min” appears on the picture
screen.
– When in a menu: change value
q
– Indication of the station name and of the
satellite on the picture screen.
– When in a menu: save setting.
Ideal matching of GRUNDIG video recor-
der and GRUNDIG SAT receiver. Only the
video recorder needs programming.
Recording control then takes place auto-
matically via data transmission from the
video recorder to the SAT receiver using a
control cable. For more information, see
page 27.
The Receiver’s Display
99
99
99
3-digit programme position indication.
}}
Indicates the aerial run.
ARD
8-digit display.
– On normal operation, it indicates the station name
of the selected programme position.
– If a menu is displayed, it indicates “
Menue
”.
– If the aerial is running, it indicates, for example,
“
O
W
” and the position reached, for
example “
19
ϒ
Ost
«.
“
1
“
2
“
3
“
4
Indicates which internal timer is programmed.
TT
II
MM
EE
RR
Is lit if at least one timer is programmed.
RR
AA
DD
II
OO
Is lit if a radio programme position is selected.
* Panda/Wegener Communications Inc.
Award for supreme sound quality.
8
POWER
TIMER
EXIT
6
OK
P+
P-
4
3
STR 600 AP
À
1
RADIO
TIMER
1
2
3
4
1 2
34
5
The Receiver at a Glance
Rear side
INPUT SAT
Connector for satellite aerial.
-
Output for terrestrial aerial and
SAT-UHF output.
Input for terrestrial aerials
(VHF/UHF).
MEGALOGIC
Connector for remote control
SAT
by various GRUNDIG video
recorders (see chapter “SAT
Recording Control via a
GRUNDIG Video Recorder
(MEGALOGIC SAT” on page 27)
and the “Datalink“ function (see
page 30).
AUDIO
Audio connectors for the con-
OUT R/L
nection of hifi equipment
R: right, L: left
EURO-AV
EURO-AV socket (output)
TV
for TV set with RGB signal loop-
through from decoder socket.
EURO-AV
EURO-AV socket (input/output)
DECODER
for PAL/MAC decoder or a second
video recorder (see chapter
“Decoder Socket/Switching Vol-
tage, page 21).
EURO-AV
EURO-AV socket (input/output)
VCR
for video recorder.
220-240 V
Mains connector for plug-in
50-60 Hz
mains cable. The unit is only dis-
connected from the mains when
the mains plug is removed!
Pin Assignment
1 2 3 4 5 6 7 8 9 10
(10-pin connector):
The plug can be removed, the indications (1 … 10)
can be seen from the top.
Pin Designation
Connection
1
1
0/12 V/0,1 A Switching voltage output for
LNB switching, relay, or simi-
lar.
1
2
AGC
Field strength measuring out-
put for exact aerial positio-
ning.
1
3
GND
Ground
1
4
+5 V/0,2 A
Output for motor polarizer or
actuator.
1
5
–I
–I–POL.
Control impulse voltage (out-
put) to motor polarizer.
1
6
MAGN.
Current supply for magnetic
polarizer ±70 mA/max. ±12 V
1
7
GND
Ground
1
8
M2
Operating voltage for 36 V
rotating motor (positive on
east run)*
1
9
M1
Operating voltage for 36 V*
rotating motor
10
–I
–I–
Control impulse voltage (input
from rotating motor)
* Maximum nominal current consumption 1.5 A,
brief peak values of 2.5 A are possible.
220-240 V
~
50-60 Hz
EURO AV VCR
EURO AV DECODER
EURO AV TV
AUDIO OUT
MEGA-
LOGIC
SAT
R
L
INPUT-SAT
950-2150 MHz
14/18 V 450 mA
TV
10 9 8 7 6 5 4 3 2 1
M 1
M 2
GND
MAGN.
POL
5 V/0,2 A
GND
AGC
0/12 V/0,1 A
36 V/1,5 A
