ENGLISH
16
1
Switch off device with »
ON/OFF
«.
2
Select the alarm type by pressing »
MODE
« until
»
e
« (= alarm with signal tone) shows in the dis-
play.
– The device switches to the alarm time; the signal
tone becomes increasingly louder. The signal
tone is switched off after a maximum of 60 mi-
nutes.
– While the alarm sounds, »
e
« flashes in the dis-
play.
Checking the alarm time
You can check the alarm time without blocking the
alarm function.
1
Switch off device with »
ON/OFF
«.
2
Press »
MODE
«.
– Display: Alarm type and alarm time.
Cancelling alarm for the day
1
Cancel alarm with »
ON/OFF
«.
– The alarm function is cancelled for the rest of the
day, the alarm sounds on the following day at the
same time.
Switching off alarm function
1
Switch off device with »
ON/OFF
«.
2
Press »
MODE
« until neither the display »
§
« nor
»
e
« are illuminated.
– The alarm function is switched off, but the alarm
times are saved.
Note:
7
To re-activate the alarm function, press »
MODE
«.
Setting the alarm time and type
You can enter an alarm time and select between two
different alarm types.
Setting the alarm time
1
Switch off device with »
ON/OFF
«.
– Display: current time.
2
Enter the alarm time by pressing and holding down
the »
MODE
« button.
– Display: the set alarm time and type of alarm
(»
§
« or »
e
«).
3
Set the desired alarm time with »
UP
«
or
»
DOWN
«.
4
Release »
MODE
«.
Alarm with radio station
Your device is equipped with a dynamic signal tone;
this means the volume of the radio station becomes in-
creasingly louder as it plays.
1
Switch on the device with »
ON/OFF
«.
2
Select channel position with the »
1 … 10
« buttons.
3
Switch off device with »
ON/OFF
«.
4
Select the alarm type by pressing »
MODE
« until
»
§
«
(
= alarm with radio station) shows in the dis-
play.
– The device switches to alarm time and switches off
again after 60 minutes.
– While the alarm sounds, »
§
« flashes in the dis-
play.
Alarm with signal tone
Your device is equipped with a dynamic signal tone;
this means the volume of the signal tone becomes in-
creasingly louder as it sounds.
ALARM MODE
________________________________________________________
TIMER MODE
__________________________________________________________
Alarm timer
You can program your device so that it reminds you
with a signal tone. The setting can be operational
whether the device is switched on or off.
1
Press »
TIMER
« and hold down.
– Display: »
00 MIN
« (minimum set time).
2
Enter the reminder time with »
UP
«
or
»
DOWN
« (in
1 minute intervals of 00 to 300 minutes).
– The display »TIMER« flashes.
– After the set time has elapsed, the signal tone
sounds.
Note:
7
The function can be prematurely ended by pres-
sing »
TIMER
« and holding for 3 seconds.
3
Switch off signal tone with »
ON/OFF
«.
