Grundig Sonoclock 760 DCF, User Manual

Page: 12 / 21

ENGLISH 27
SETTINGS __________________________________
Setting time and day of the week
If the device has been switched on for the first time – if no time signal has
been received – »
:
« flashes in the display as a sign that the time has to be set.
The same applies after a power failure or if the device has been disconnected
from the mains supply and no back-up battery has been inserted.
1
Press »
SET
«.
– Display: »
:
« flashes.
2
Press »
HOUR/VOL
« briefly to set the hours step-by-step or hold down to
run through the hours continuously.
3
Press »
MIN/VOL
« briefly to set the minutes step-by-step or hold down to
run through the minutes continuously.
Notes:
When the minute display changes from »
59
« to »
00
«, this does not affect
the hour display.
The device saves the set time automatically after 10 seconds.
4
To set the day of the week, press »
TIME ZONE/WEC
« and »
SET
« at the
same time.
– Display: for example, the day of the week »
1
« = Monday.
5
Set the day of the week (»
1
« = Monday, »
2
«, »
3
«, »
4
«, »
5
«, »
6
« or
»
7
« = Sunday) using »
HOUR/VOL
« or »
MIN/VOL
«.
– The device saves the selected day of the week automatically after
5 seconds.
Note:
Display the selected day of the week and press »
SNOOZE
« longer than
3 seconds and hold it pressed.
02_Sonoclock760_en 22.03.2007 14:47 Uhr Seite 27