Switching off the sleep timer
1
For switching off the sleep timer before the set time, switch off device
with »
ON/OFF
« or press and hold down »
SLEEP
«.
– Display: »
љ
« and the remaining time stop glowing.
– The device switches off.
Setting the reminder timer
1
Activate the function with »
NAP
«.
– Display: »
60
« and »
NAP
« flash.
– The circular snooze LED flashes.
2
Confirm reminder time with »
S
« or »
A
« (in 10 minute intervals from
120 to 10 minutes) and confirm with »
NAP
«.
– Display: »
NAP
« the remaining time until the reminder, e.g. »
36
«.
– After the set time has expired, a signal tone sounds (for max. 90
minutes).
– Display: »
00
« flashes briefly and then stops with »
NAP
«.
3
To switch off the signal tone, press and hold down »
NAP
«.
Switch off reminder timer
1
To switch off the reminder timer before the set time, press »
NAP
« and
hold it down.
– Display: »
NAP
« and the remaining time until the reminder stop
glowing.
Operation with the projector
You can use the supplied projector to project the current time to the wall or
the ceiling.
1
Connect the projector cable to the socket »
« (left side of the device).
– The light in the projector lights up.
2
Direct the body of the projector in the desired angle.
3
Set the focus of the projection by moving the lens holder.
– The current time can be seen on the wall or on the ceiling.
4
Switch the projector off and on by using »
PROJECTOR
«.
Note:
If you are not using the projector for longer periods of time, take it off
the device.
OPERATION
__________________________________________
AL 1
ON/
12:00
ENGLISH
31
