18 ENGLISH
Setting the alarm time
1
Press »
ALARM ON/OFF
« repeat-
edly to set the desired alarm sound
(» « = buzzer, » «= radio station).
– Display: The selected alarm signal
symbol (» « or » «).
Note:
7
If no symbol is shown, the alarm
function is cancelled.
2
Press »
SLEEP/
«.
– Display: »
00:00
« flashes.
3
Press »
&
« (hold down) to set the
alarm time with the time running quickly
forwards;
and/or
press »
%
« (hold down) to set the
alarm time with the time running slowly
backwards.
4
Release »
&
« or »
%
« to end the set-
ting.
– Display: The set alarm time and the
selected alarm signal symbol.
– The device switches on at the set
alarm time with the selected alarm
signal.
Adjusting the brightness of
the display
1
In stand-by mode, press »
DIMMER
«
repeatedly to change the brightness
of the display backlight in three levels
(bright, medium, low).
SETTINGS
________________________________________
Setting the clock
When you plug in the device for the first
time, » « appears on display to show the
time as »00:00« like an analog clock.
The same indication applies after a power
failure or if the device has been plugged
out and no back-up battery is inserted.
1
Press »
MEM/
«.
– Display: »
00:00
« flashes.
Note:
7
If you do not start setting the clock
in a few seconds, the flashing stops
and the digits disappear.
2
Press »
&
« (hold down) to set the
clock with the time running quickly for-
wards;
and/or
press »
%
« (hold down) to set the
clock running slowly backwards.
3
Release »
&
« or »
%
« to end setting.
– The digital numbers disappear, » «
and » « shows the time like an ana-
log clock.
