![Grundig Sonoclock 390 Manual Download Page 10](http://html1.mh-extra.com/html/grundig/sonoclock-390/sonoclock-390_manual_2272445010.webp)
20 ENGLISH
Interrupting the alarm
1
Press »
SNOOZE
« while the
alarm is sounding.
– The alarm (signal tone or radio)
stops.
– The alarm goes on again
at 9-minute intervals (the
total alarm time is 1 hour, 59
minutes).
Cancelling the alarm for the
day
1
Press »
ALARM
« while the alarm
is sounding.
– The alarm (signal tone or radio)
stops, but the alarm function re-
mains activated for the next day
at the set time.
Cancelling/activating alarm
stand-by
1
Switch »
« to » « (stand-
by) to cancel the alarm function.
– Display: The » « LED goes out.
– The set alarm time is saved.
2
Switch »
« from » «
(standby) to » « or » « to acti-
vate the alarm function.
– Display: The » «LED lights up.
OPERATION
_____________________________________
Timer mode
The device possesses a sleep timer,
which it switches off in radio mode at
a preset time. It is possible to set the
switch-off time for between 1 minute
and 1 hour 59 minutes.
Switching on the sleep timer
1
Press »
SLEEP
« to switch on the
device.
– Display: The switch-off time
»
0:59
« (59 minutes).
– You will hear the selected radio
station.
2
To set the switch-off time, press
and hold down »
SLEEP
«.
3
Press »
HOUR
« briefly to extend
the switch-off time to 1 hour 59
minutes (»
1:59
«).
4
Press »
MIN
« step-by-step or hold
it down to set the minutes (bet-
ween »
59
« and »
00
«).
5
Release »
SLEEP
« to conclude the
setting.
– After the selected switch-off time
has elapsed, the device swit-
ches off automatically.
Switching off the sleep timer
1
To switch off the sleep timer before
the set time, press »
SNOOZE
«.
– The device switches off.