33
ENGLISH
Problem
Possible cause
Solution
The base does not heat
K
although the appliance is
plugged.
There may be a problem with
the connection.
Check the plug and the power cord of
the appliance
Press the on/off button
D
.
Contact the authorized service if the
appliance does not operate although
the appliance is plugged and you
have pressed the on/off button.
The appliance does not pro-
duce steam.
The amount of water in the
water reservoir may be inad-
equate.
Fill the water up to the MAX line in the
water reservoir.
Check if the water reservoir
H
is in-
stalled in its housing.
The appliance does not provide steam
if the temperature is set to “•” posi-
tion. Bring the temperature setting to
“••”, “•••” or “MAX” position.
Water droplets drip on the
cloth.
Water may come out when
you press the steam trig-
ger
C
before the appliance
reaches the set temperature.
When the iron is being prepared
symbol “ ” in the control panel
A
turns off completely, your appliance is
ready for ironing.
Sediments and residues fall
of from the base
K
while
ironing.
Such sediments may occur
if the water you use in your
appliance is too calcareous.
Fill the water reservoir of the appli-
ance by mixing the tap water and
drinking water for your next ironing
operations.
There are stains on the base
K
.
Wet clothes are ironed / scale
stains have occurred on the
base
K
.
Wipe the sediments and residues with
a lightly dampened cloth after the ap-
pliance is cooled down adequately.
The on/off button
D
of the
appliance flashes.
The appliance may have
switched to auto off mode.
Press the on/off button
D
.
The “
” symbol flashes
on the control panel
A
.
The time for descaling has
come.
Perform the descaling operation.
TROUBLESHOOTING __________________________
