20
POWER SUPPLY
___________________________________
Mains operation
Note:
Check that the mains voltage on the type plate (on the bottom of the
device) corresponds to your local mains supply. If this is not the case,
contact your specialist dealer.
1
Plug the mains cable into the socket (230 V~, 50 Hz).
Note:
The only way to disconnect the device from the mains supply is to pull
out the plug.
Inserting the back-up battery
During mains operation, the back-up battery ensures that stored settings are
not lost in the case of a power failure or when the device is briefly discon-
nected from the mains.
1
Open the battery compartment by pressing the area marked with an
arrow on the drawing and lifting up the cover.
2
Before inserting the battery (9 V, 6LF 22) into the cable connection
compartment, note the polarity of the battery.
3
Insert the battery upright.
4
Replace the cover of the battery compartment and click the catch into
place.
Note:
When closing the battery compartment, make sure that you do not
wedge in the FM wire antenna, which should be inserted into its special
recess.
Note:
Remove the back-up battery when it is flat or when you know that the
device will not be used for a long period of time.
Environmental note:
Batteries, including those which contain no heavy metal, may not be
disposed of with household waste. Please dispose of used batteries in
an environmentally sound manner. Find out about the legal regulations
which apply in your area.
VOLUME
TU
N
IN
G
AL
ARM
1
ǵ
ALAR
M 2
SON
OCLO
CK 5
2
FM
88
92
96
100
104
106
108
MHz
N
ATU
RAL SOUND
02 SC 5302, GB 07.01.2003 8:49 Uhr Seite 20
