ENGLISH
31
ENGLISH
31
Selecting the tape input source
1
Move the »
CD TAPE/OFF RADIO
« switch to the »
TAPE
« position.
2
Press »
7
ə
« to open the tape compartment.
3
Insert a tape in the compartment with the open side facing up and the full reel on the right
side.
4
Close the tape compartment.
Tape playback
1
Press »
ľ
« to start playback.
– Playback ends at the end of the side of the cassette.
2
Press »
II
« to pause playback.
Press »
II
« to resume playback.
3
End playback by pressing »
7
ə
«
4
Press »
7
ə
« again to open the tape compartment and take out the cassette.
Fast forward and rewind
1
Press »
ľľ
« or »
ıı
« when the tape is in the stop position.
– »
ľľ
« fast forwards to the end of the tape, »
ıı
« rewinds to the beginning of the
tape.
2
Press »
7
ə
« at the required position on the tape.
Tape recording
Erase protection
Every new recording overwrites the existing recording on the tape.
You can protect your own tapes against accidental erasure by breaking the safety
tabs on the top of the tape.
Pre-recorded commercial music tapes are already protected against accidental
erasure.
If you want to record on to a protected tape, cover the opening with adhesive tape.
Notes:
Only use NORMAL-type cassettes (IEC I) for recording. CHROME (IEC II) or METAL
(IEC IV) tapes are not suitable.
The Ultra Bass System does not affect recording.
Recording from the radio
1
Put in a cassette with the protection tabs intact and press »
ľľ
« or »
ıı
« to find the
position on the tape.
2
Move the »
CD TAPE/OFF RADIO
« switch to the »
RADIO
« position and select the
radio station.
3
Press »
•
« to start recording.
– The »
ľ
« button is automatically engaged.
– The device automatically stops recording at the end of the tape.
TAPE MODE
_____________________________________________________
1
