Grundig RCD 2000, Service Manual, Page: 17 / 42

GRUNDIG Service 1 - 17
RCD 2000 Allgemeiner Teil / General Section
MULTIPLE ROOM OPERATION
_____________________
Special features of multiple room mode
You can operate up to five additional pairs of loudspeakers – distributed in dif-
ferent rooms – with the HiFi system.
If you do not want to carry the remote control from room to room in order to set
the volume and tone for the individual pairs of loudspeakers, you have the opti-
on of using more than one remote control unit to operate the HiFi and the louds-
peakers.
Installing additional pairs of loudspeakers
1
Press the » CONTROL « button on the remote control.
– The » CONTROL « menu appears.
2 From the »
CONTROL
« menu, select the »
INSTALL
« item by pressing
» A « and then »
OK
« to confirm.
– The »
INSTALL
« menu appears.
3
In the »
INSTALL
« menu select »
SPEAKERS
« by pressing » OK «.
4
Switch on the left loudspeaker of the second pair using the » POWER « but-
ton.
– The remote control display reads: »
LS1
« and the orange indicator in the
»
POWER
« button lights up, which means that the remote control and the
HiFi have detected the left loudspeaker.
5
Switch on the right loudspeaker of the second pair using the » POWER «
button.
– The remote control display reads: »
LS1 LS 2 « and the orange indicator
in the »
POWER
« button lights up, which means that the remote control
and the HiFi have detected the right loudspeaker.
CONTROL
AUDIO CHANNEL
INSTALL
INSTALL 1
SPEAKERS
REPLACE SPEAKERS
INSTALL 1
ALL SPEAKERS ON
LS1
INSTALL 1
ALL SPEAKERS ON
LS1 LS 2
6 Press »
OK
« to confirm the setting.
– The remote control display reads: »
SELECT LEFT LS AND PRESS
OK
«, the orange indicator in the » POWER « button on the left loudspea-
ker flashes and the orange indicator in the » POWER « button on the right
loudspeaker lights up continuously.
Note:
If you want to use the left loudspeaker as a right loudspeaker, press » + «
once. The orange indicator on the selected loudspeaker flashes.
From the second pair of loudspeakers onwards, the remote control display
also shows the number of the room containing the pair of loudspeakers you
can operate with it.
7 Press » OK « to confirm the setting.
– The remote control display reads: »
CONFIRM RIGHT LS WITH OK
«,
the orange indicator in the » POWER « button on the left loudspeaker
lights up continuously and the orange indicator in the » POWER « button
on the right loudspeaker flashes.
8 Press »
OK
« to confirm the setting.
– The remote control display reads: »
READY
«, the orange indicators in both
» POWER « buttons on the loudspeakers light continuously.
9
Press » OK « to confirm the setting.
– The remote control display reads: » TUNER 87.50 MHz «.
– Both loudspeakers are switched on automatically and the green indicators
in the »
POWER
« buttons light up continuously.
Note:
If the loudspeakers are not switched on automatically, switch them on using
the remote control menu as described in the next section.
MULTIPLE ROOM OPERATION
________________________________________________
INSTALL 1
SELECT LEFT LS
AND PRESS OK
INSTALL 1
READY
INSTALL 1
CONFIRM RIGHT LS
WITH OK
TUNER
87.50 MHz
MENU INFO MEMO