16
Setting and storing radio stations
Automatic station search
After the hi-fi system has been connected to the mains for the first
time, the device in tuner mode searches for the 40 stations with the
best reception and stores them.
1
After connection, switch on the hi-fi system by pressing
»
TUNER/BAND
«.
– Display: »
FM
«, the frequency in rapid run-through and
»
PROG
«.
– The search has started. After the search has finished, you will
hear the station stored at preset position 01.
Notes:
The automatic station search can be interrupted by briefly
pressing »
7
«.
The automatic station search can be repeated any time by
pressing and holding down »
PROG./RAND./TIME
« until
the frequency display switches to rapid run-through. The sta-
tions stored previously will be deleted.
Automatic station search
1
Switch on the hi-fi system by pressing »
TUNER/BAND
«.
– Display: »
TUNER
«, then the wave band and frequency or
station name.
2
Press »
TUNER/BAND
« to select the frequency band
(FM or MW).
– Display: »
FM
« or »
MW
«.
3
Activate the station search by pressing »
UP TUNING/
ALBUM DOWN
« until the frequency display changes to
rapid run-through.
– The search stops when a station is found.
Manual station search
1
To move the frequency forward in steps, briefly press
»
UP TUNING/ ALBUM DOWN
« several times.
– The frequency changes in 50 kHz steps (FM) or 9 kHz steps
(MW).
SETTINGS
______________________________________________
P02
FM 97.55
P16
TUNER
MHz
FM 87.65
MHz
PROG
f
P16
ENERGY
f
PROG
!
