ENGLISH
31
Troubleshooting
If a problem occurs, first refer to this information before you take the device
for repair.
If you are unable to rectify the fault using the information given here, contact
your local dealer or service specialist.
Under no circumstances should you attempt to repair the device yourself, as
this would invalidate the guarantee.
INFORMATION
_______________________________________
PROBLEM
The device will not
switch on.
Playback will not
start.
No display
Playback will not
start.
Playback is interrupt-
ed.
No display
Playback does not
begin with the first
file or track.
No sound, poor
sound quality
POSSIBLE CAUSE
The batteries are incorrectly
inserted.
Batteries are flat.
The »
HOLD
« switch is in the
»
ON
« position.
The mains adapter is not prop-
erly connected.
The CD compartment is not
properly closed.
Moisture has collected on the
lens.
The CD has not been inserted
correctly.
The CD is damaged or dirty.
The INTRO function is activated.
The PROGRAM or RANDOM
function is activated.
The volume is at minimum level.
The earphones plug is loose or
not plugged in.
The earphone plug is connected
to the »
LINE OUT
« socket.
REMEDY
Insert the batteries correctly.
Insert new batteries or
recharge them.
Push the »
HOLD
« switch
to the »
OFF
« position.
Check the mains adapter.
Close the CD compartment.
Let the device stand for a
while in a warm room.
Insert the CD with the label
facing upwards.
Replace or clean the CD.
Switch off the INTRO
function.
Switch off the PROGRAM
or RANDOM function.
Use »
VOLUME
g
« to
adjust the volume.
Check the connection.
Plug the earphones plug
into the »
0
« socket.
