Grundig MT 8240 WET & DRY, Manual

Page: 25 / 96

25 ENGLISH
comb attach-
ment 4 2 mm
comb attach-
ment 5 10, 12, 14, 16 mm
comb attacht-
ment 6 2, 4, 6, 8 mm
3
Push the comb attachment carefully
and firmly onto the rounded rear half
of the cutting head from above and
let it click into place.
Note
7
To adjust the small and large adjust-
able comb attachments 5 and 6
press the button in the middle of
each attachment and push it up or
down.
4 Press the
C
button to switch on the
appliance and start trimming.
5
Press the
C
button to switch off the
appliance after use.
6 After use, remove the comb attach-
ment
4
to
6
by pressing the lock-
ing tab at the back and lifting the
comb attachment.
3 Loosen the beard hair by combing
the beard in the direction the hair
grows.
4
Press the
C
button to switch on the
appliance and start trimming your
beard.
5 Press the
C
button to switch off the
appliance after use.
Trimming hair or beard to
a certain length
Please use the comb attachments
4
to
6
.
1
If necessary, remove the attachment
by pressing in both side catches
B
and lifting off.
2 Insert attachment
A
(width 38 mm)
or
7
(width 30 mm) carefully at the
top and press down until it clicks into
place.
Note
7
The comb attachments fit both cutting
heads.
OPERATION ______________________________