UR2170 / English Instruction Manual
13
Listen music from a USB
Press <
>key to turn device on , press <
Func
> select work mode to USB work mode, Display
should be show as below:
a.
Insert USB-Disk into UBS jack, device will reading.
1.
The device seek complete, device will play from beginning of play list if not any key
press.
2.
Press “
” to play or Pause under music play back
3.
4.
Press and hold “
” to fast speed forward, press once to next track
5.
Press and hold “
” to Fast speed rewind, press once back to previously track.
b.
Program play
1.
Press <
MEM
> once to program mode when stop mode.
2.
Press <
> or <
> to select track for first of program list.
3.
Press <
> or <
Folder-
> to select folder for first of program list.
4.
Press <
MEM
> again to select track for next. Up to 64
5.
Press <
> to confirm the setting and play.
6.
Press <
> twice to cancel program play
c.
Electronic Volume Control
1.
Press <
VOL+
> once, to increase speaker volume by one step. Hold for continually.
2.
Press <
VOL-
> once, to decrease speaker volume by one step. Hold for continually.
3.
Adjust Volume control sound output to a comfortable level , don
’t make it too loud
Aux mode
The Music Resource connect device with AUX cable, Press <FUNC>change to AUX.
Using AOT (Automatic OFF Timer)
The function let user setup a onetime timer to let device automatic power off
1. Press <
AOT
> once to active AOT function, if device stay on the standby, will turn on the
device.the display will show as below:
2. Press the key every time will change each 5 minutes, value of timer since 90 to OFF.
3. Press other key to start its corresponding function with the AOT timer is run at background
4. When no key has been pressed for 15 seconds, the system exit AOT timer display mode, but
the AOT timer is run at background
5. Once <
AOT
> was press, The current AOT value should show on display.
6. If want to cancel the AOT,press <
AOT
> several times until it to OFF.
Press "Play mode" to select play back mode as Rep one,rep all,rep fol,random
