14
4. Connect the video source to the S-VIDEO input jack of the TV by the
S-video cable
5. When using the LCD as a computer screen, connect the PC from the
VGA jack of the monitor by the relevant cable.
IV. TV/Monitor Screen Operation
(1) Basic
operation
1. Press
the
STANDBY
button on the unit or on the remote control to
switch on the TV. The power indicator will light up in blue colour. Press
the
STANDBY
button again to switch to standby mode, the indicator will
change to red.
2. Press
the
VOL -
or
VOL +
button to adjust the volume level. Press the
VOL -
button repeatedly to decrease the volume; press the
VOL +
button repeatedly to increase the volume from 0 to 100.
(2) Changing
Channels
1. Press
the
SOURCE
button on the remote control to select the
ATV
or
DTV input mode. If you are using the receiver for the first time, an
Installation Guide menu will be displayed to guide you through
the
channel scan, Use the remote control to finish channel scan (you can
also refer to Chapter V in this manual for the channel scan operation).
2. Channel ‘1’ will appear on the left top corner of the screen after the
channel scanning is finished. Press the
CH-
or
CH+
button to select the
previous or next channels or press the
0-9
buttons to enter a channel
number directly.
3. Press
the
button on the remote control to switch between the