15
ENGLISH
SETTINGS
---------------------------------------------------------------------------------------------------------------------------------------
Time Setting
1
To set the time, your micro system must be in
standby mode first. Then press and hold the
»
CLOCK
« button for about 2 seconds.
– Display: »
24 H
«.
2
Select the time format (12 or 24 hours) by
pressing button » « or » « and confirm
with the »
CLOCK
« button.
– Hours tick.
3
Select the time by pressing button » «
or » « and confirm using the »
CLOCK
«
button.
– Minutes tick.
4
Set the minutes by pressing button » «
or » « and confirm using the »
CLOCK
«
button.
– Display: current time.
– SYNC ON: The time is synchronized through
DAB+ or RDS signal.
– SYNC OFF: The time isn't synchronized
through DAB+ or RDS signal.
Notes:
7
Some RDS stations transmits an RDS time
signal. If the selected RDS station transmits
time information, the time can be set auto-
matically.
Press »
INFO
« repeatedly until the time is
displayed. The »
RDS CLK
« display means
that the time signal is not yet received. Wait
for the time to display.
7
The time must be reset after a power outage
or after disconnecting the device from the
main line.
Alarm Setting
1
To program the alarm, your micro system
must first be in standby mode. Then press the
»
TIMER
« button on your remote control and
hold it down for about 2 seconds.
– Display: »
TIMER
«.
2
Proposal and display of the different
alarm programs: »
disC
», »
USB
« or
»
TuneR
«. Press the button » « or » «
and confirm using the »
TIMER
« button.
– Hours tick.
3
Select the time by pressing button » « or
» « and confirm using the »
TIMER
« but-
ton.
– Minutes tick.
4
Set the minutes by pressing button » « or
» « and confirm using the »
TIMER
« but-
ton.
– Volume settings blink.
5
The volume displays »
VOL 10
«. Adjust the vol-
ume by pressing button » « or » « and
confirm using the »
TIMER
« button.
– You can adjust the volume between
»
VOL 01
« and »
VOL 31
«.
– You can adjust the alarm duration among
"DUR 15, DUR 30, DUR 45, DUR 60''.
6
The symbol »
¥
« will then display on the right
screen of the minutes to confirm the program-
ming of the alarm.
Note:
7
If you want to disable the alarm, press the
»
TIMER
« button on the remote control
once and the alarm symbol »
¥
« will dis-
appear from the screen.