background image

ENGLISH 19

POWER SUPPLY

___________________________________

Runs on rechargeable
batteries

If run with the installed 
rechargeable nickel metal hydride
batteries, use the supplied mains
adapter as a charger.

1

Insert the mains adapter cable
into the socket 

; plug the

mains adapter plug into the
mains socket.
– The indicator 

lights up. 

Note 

7

Fully charge the batteries 
(24 hours) before using for the
first time or if the batteries have
not been used for a long time.

7

After the batteries are first
charged, the charging time is
approx. 12 hours when the
appliance is switched off. If you
switch on the appliance while it is
charging, charging will stop.

7

The ambient temperature should
be between 5˚C and 40˚C.

E

F

7

When fully charged, the
appliance works for around
45 minutes. It is not advisable to
charge the batteries after every
use, especially if you do not use
the appliance for the full 30 min-
utes. Only charge the batteries
when they are completely dis-
charged. This increases their life.
Do not charge them every day.

Charge at the charging
station
1

Push the appliance's socket 
onto the charging station
connector.

2

Insert the cable of the mains
adapter into the socket of the
charging station.

3

Plug the mains adapter plug into
the mains socket.

F

02MC8641_en  03.12.2009  13:44 Uhr  Seite 19

Summary of Contents for MC 8641














Reviews: