31
ENGLISH
OPERATION ______________________________
7
You can reset the volume of coffee back to the factory setting by selecting the default set-
ting.
Hot Water
The appliance can dispense hot water by simply pressing the hot water button. The hot water
button and the illumination will lights up indicates that the appliance is heating up the water.
When the hot water button and the illumination turn off, the water is ready to serve.
Mode Selection
The machine has two different setting: default setting, ECO mode and speed mode. In ECO
mode, the appliance helps to save more energy. In speed mode, the user can make their
coffee faster than in default setting.
ECO Mode
Speed Mode
Default Setting
Illumination Light
No
Yes
Yes
Pre-brewing*
Yes
No
Yes
Auto shut off time
10mins
30mins
20mins
Cup Volume memory
Yes
Yes
Yes
Note
7
The pre-brewing function moistens the grounded beans in the brewer with a small amount
of water before full extraction. This expands the coffee grounds to build up a greater pres-
sure in the brewer which help extraction of all the oils and full flavor from the grounded
beans.
1
When the machine is in standby condition, press and holds the for 5 seconds.
2
The will then be flashing and the following button will have the following indications for
different settings:
Hot water button
Strong espresso
button
Mild espresso
button
In ECO Mode
Lights ON
Flashing
Flashing
In Speed Mode
Yes
No
Flashing
In Default Setting
Flashing
Flashing
Lights On
3
Press the hot water button for ECO mode, strong espresso button for speed mode and
mild espresso button for default setting. Two Beep sound will be heard indicates that the
mode is being selected. (Note: If you are pressing the relative lights on button for each
mode, the machine will not response).
4
If you would like to remain the setting unchanged, press again or wait for 5 seconds for
the machine to return to the standby condition