
17
ENGLISH
Preparation
Caution
7
7
First time use: Run the appliance at least 4
times without adding coffee.
7
7
Please follow the steps 1 - 2 and 7 - 12 in the
“Brewing Coffee” section.
1
Remove all packaging and stickers and dis-
pose of them according to applicable legal
regulations.
2
Before using the appliance for the first time,
clean all parts which come into contact with
water carefully. Please see full details in the
“Cleaning and Care” section.
3
Make sure that the appliance is placed in an
upright position and on a stable, flat, clean,
dry, and non-slip surface.
Brewing Coffee
1
Open the water tank cover
A
and use the
glass jug
G
to fill the water tank
E
with the
required amount of water, but do not fill past
the “max” mark. The brewed amount of coffee
will be 10 % less than the filled water, because
it is absorbed by the coffee grounds and the fil-
ter. The scale on the glass jug is marked in cof-
fee cups, e.g. 4 = 4 cups. For the good coffee
taste it is suggested to operate the appliance
with at least 4 cups coffee serving.
Notes
7
7
Use only clean, cold, and fresh drinking
water.
7
7
There is a drip hole on the back of the water
reservoir to prevent exceeding the capacity of
the coffee maker. If you add too much water,
it will drip out from the back of the unit.
2
Close the water tank cover
A
.
3
Pull out the filter basket
C
by pulling the han-
dle
B
.
4
Take a suitable paper filter (1 x 4) and insert
the paper filter into the filter basket
C
.
Note
7
7
Use only one paper filter at each time. Make
sure that the paper filter does not bend or
fold.
5
Fill the filter with the desired amount of ground
coffee. To do this, you may use the supplied
measuring spoon.
6
Insert the filter basket
C
back into the side
rail.
7
Place the glass jug
G
on the warming plate
H
.
Caution
7
7
If the filter basket
C
is not closed or the glass
jug
G
is not placed accurately, the drip-stop
function will not function properly. It could
cause hot water or hot coffee to overflow.
8
Connect the plug to the wall socket.
9
Turn the appliance on by pushing the ON/OFF
button
M
.
– The ON/OFF button
M
illuminates and the
brewing process begins.
Notes
7
7
The brewing process can be stopped at any
time by pushing the On/Off button
M
again.
7
7
The appliance is equipped with a drip-stop
F
located underneath the filter basket
C
and
enables you to briefly remove the glass jug
G
to pour coffee before the water has finished
running through the machine.
OPERATION _________________________________