16 ENGLISH
Preparation
Caution
█
First time use: Run the appliance at least 4
times without adding coffee.
█
Please follow the steps 1 - 2 and 7 - 12 in the
“Brewing Coffee” section.
1
Remove all packaging and stickers and
dispose of them according to applicable
legal regulations.
2
Before using the appliance for the first time,
clean all parts which come into contact with
water carefully. Please see full details in the
“Cleaning and Care” section.
3
Make sure that the appliance is placed in an
upright position and on a stable, flat, clean,
dry and non-slip surface.
Brewing Coffee
1
Pull off and fill the water tank
F
with the
required amount of water, but do not fill
past the “12” mark. The brewed amount of
coffee will be 10% less than the filled water,
because it is absorbed by the coffee grounds
and the fillter. The scale on the glass jug
is marked in coffee cups, e.g. 4 = 4 cups.
For the good coffee taste it is suggested to
operate the appliance with at least 4 cups
coffee serving.
Notes
█
Use only clean, cold and fresh drinking water.
█
There is a drip hole on the back of the water
reservoir to prevent exceeding the capacity of
the coffee maker. If you add too much water,
it will drip out from the back of the unit.
2
Close the water tank cover
A
and open the
filter basket cover
B
.
3
Pull out the filter basket
C
.
4
Take a suitable paper filter (1 x 4) and insert
the paper filter into the filter basket
C
and
close the filter basket cover
B
.
Note
█
Use only one paper filter at each time. Make
sure that the paper filter does not bend or
fold.
5
Fill the filter with the desired amount of ground
coffee. To do this, you may use the supplied
measuring spoon.
6
Insert the filter basket
C
back into the housing.
7
Place the glass jug
H
on the warming plate
I
.
Caution
█
If the filter basket
C
is not closed or the glass
jug
H
is not placed accurately, the drip-stop
function will not work properly. It could cause
hot water or work hot coffee to overflow.
8
Connect the plug to the wall socket.
9
Turn the appliance on by pushing the On/Off
button
P
.
– The On/Off button
P
illuminates and the
brewing process begins.
Notes
█
The brewing process can be stopped at any
time by pushing the On/Off button
P
again.
█
Ventilation slots
D
allow the steam output. Do
not block these during use.
█
Your Coffee Maker is equipped with a keep
warm function. It will keep your coffee warm
for 60 minutes after the brewing process,
unless you turn the appliance off.
█
The appliance is equipped with a drip-stop
G
located underneath the filter basket
C
and
enables you to briefly remove the glass jug
H
to pour coffee before the water has finished
running through the machine.
Caution
█
Make sure to place the glass jug
H
on the
warming plate
I
quickly (max. 30 seconds).
Otherwise the brewed coffee from the filter
could overflow. If you want to use the glass
jug for more than 30 seconds switch off the
appliance.
OPERATION _________________________________
