Grundig HD 6862, Manual

Page: 5 / 12

ENGLISH
5 5
OPERATION
__________________________________________________________
Operation
Check if the mains voltage on the type plate (on
the handle of the device) corresponds to your
local mains supply.
1 Towel dry your hair thoroughly after washing.
2
Attach the concentrator nozzle on the
hairdryer and align it as required.
3 Plug the power cord into the wall socket.
4
Turn on the appliance with switch and set
the blower level.
5 Set the temperature level with switch .
6
While drying, you can interrupt the hot air
flow, by pressing and holding down (Cool
Shot).
Note
7
The Cool Shot interrupts the hot air with a flow
of cold air. This allows you to fix your hairstyle
better and more lastingly.
7 While drying, you can switch to the turbo
blower level, by pressing the button.
8
After use, switch off the appliance with the
button and pull out power cord from
the wall socket.
Caution
7
Never wind the power cord around the appli-
ance, as this can result in damage.
Check the power cord and the appliance regu-
larly for visible damage.
A
C
E
D
B
C
A
F
Cleaning and care
Pull the plug out before cleaning.
Never submerge the appliance in water.
Use a soft, dry cloth to clean the housing.
Remember to clean the air inlet grille occa-
sionally with a soft brush to remove hairs and
dust.
Take off the air inlet grille and clean the filter
at regular intervals. Pull back the grille to do this.
G
G