9
ENGLISH
OPERATION __________________________
Straightening hair
Caution
7
The housing of the appliance
becomes very hot. Do not touch
the housing near the heating
element.
7
Place the appliance on a solid,
flat, heat resistant surface.
Do not place the appliance on
any soft or uneven surfaces such
as carpets, rugs or bedding and
never cover.
7
Make sure your hair is com
pletely dry.
1
Plug the power cord
G
into the
wall socket.
2
Switch the appliance on by push
ing the On/Off switch
F
.
– The LED display
D
lights up in
white.
3
Set the temperature by operating
the "+" and "" buttons
E
– The LED display illuminates the
temperature when it is ready.
Notes
7
Adjust to the lowest temperature
the first time you use it.
7
Adjust the temperature (5 set
tings) suitable for your type of
hair.
4
Comb or brush out a section
of your hair about 3 cm wide,
starting at the neck.
5
Guide the brush in a careful,
smooth movement away from the
head to the end of the section of
hair. Avoid making kinks in it
Caution
7
Do not touch the bristles as they
are very hot.
6
Hold the appliance in position
until the hair is heated.
–
This takes a few seconds at the
most.
Notes
7
Repeat the procedure section by
section.
7
If you have thick hair, you might
have to repeat this procedure on
the same section several times.
7
Keep the strand of hair taut so
that no kinks form.
7
After use, switch the appliance
off by pushing the On/Off switch
F
. The LED display
D
turns off.
Then unplug the power cord
G
.
Notes
7
Switches off automatically after
60 minutes
