110
If the product has an
emergency draining hose,
to discharge the water:
•
Pull the emergency draining hose
out from its seat
•
Place a large container at the
end of the hose. Drain the water
into the container by pulling out
the plug at the end of the hose.
When the container is full, block
the inlet of the hose by replacing
the plug. After the container
is emptied, repeat the above
procedure to drain the water in
the machine completely.
•
When draining of water is
finished, close the end by the plug
again and fix the hose in its place.
•
Turn the pump filter to take it out.
•
Clean any residues inside the
filter as well as fibers, if any,
around the pump impeller region.
•
Install the filter.
•
If the filter cap is composed of
two pieces, close the filter cap
by pressing on the tab. If it is
one piece, seat the tabs in the
lower part into their places first,
and then press the upper part to
close.
