To deactivate the Child Lock:
Press and hold
1
st
Auxiliary Function
button for 3 seconds. After the
countdown as
"CL 3-2-1"
on the display
is over "Child Lock Enabled" symbol
turns off.
Cancelling the programme
The programme is cancelled when the
machine is turned off and on again.
Press and hold
On / Off
button for 3
seconds. After the countdown as "3-2-
1" on the display is over, the machine
turns off.
C
If you press
On / Off
button when
the Child Lock is enabled, the
programme will not be cancelled.
You should cancel the Child Lock
first.
If you want to open the loading
door after you have cancelled the
programme but it is not possible
to open the loading door since the
water level in the machine is above
the loading door opening, then
turn the
Programme Selection
knob to
Pump+Spin
programme
and discharge the water in the
machine.
End of programme
When the programme completes, End
symbol will be displayed.
If you do not press any button for 10
minutes, the machine will switch to
OFF mode. Display and all indicators
are turned off.
When you press On/Off button, the
completed programme steps will be
displayed.
Your machine is equipped
with a “Standby Mode”
In case of not starting any programme
or waiting without making any other
operation when the machine is turned
on by On/Off button and while it is in
selection step or if no other operation
is performed approximately 2 minutes
after the programme you selected has
come to an end, your machine will
automatically switch to energy saving
mode. Brightness of indicator lights
will decrease. Also, if your product
is equipped with a display showing
the programme duration, this display
will completely turn off. In case of
rotating the Programme Selection
knob or pressing any button, lights and
display will restore to their previous
condition. Your selections made while
exiting the energy saving mode may
change. Check the appropriateness
of your selections before starting the
programme. Readjust if necessary.
This is not a fault.
Setting VOLUME level
•Low volume and high volume
To adjust the volume level keep the 2
nd
auxiliary function button pressed for 3
seconds. After the countdown as " 3-2-
1" on the display is over, volume level
symbol will be lit and the new volume
level will be shown.
32
