21 / EN
Washing Machine / User’s Manual
• Child Lock
You can use the Child Lock to prevent children from tampering with the machine. Thus you can avoid any
changes in a running programme.
C
When the Child Lock is enabled, you can press the On/Off key to switch the machine on or off. When you switch on the
product again, programme will resume where it left off, with the child lock enabled.
If any key pressed while the Child Lock is enabled, an audible warning will be heard and the child lock icon will flash.
Child lock cannot be selected while the remote control function is enabled.
To enable Child Lock:
Press and hold the auxiliary function key 3
for three seconds. When the countdown
“CL 3-2-1"
on the
display ends,
"CL On"
(Child Lock On) icon will be displayed. When this warning is displayed, you can release
the
auxiliary function key 3
.
To deactivate Child Lock:
Press and hold the auxiliary function key 3
for three seconds. When the countdown
“CL 3-2-1"
on the
display ends,
"CL Off"
(Child Lock off) icon will disappear.
• Wireless Connection
You can use the wireless connection function to pair your machine with your smart device. This way, you can use your smart
device to get information about your machine and control it.
To activate wireless connection:
Press and hold the auxiliary function key 1
for three seconds. After the countdown
“3-2-1”
on the
display,
“Wireless
Connection
”
symbol will be displayed. When this warning is displayed, release
the
auxiliary function key 1
. The wireless connection icon will flash while the product is connecting to internet.
If the connection is successful, the icon’s light will remain on.
To deactivate wireless connection:
Press and hold the auxiliary function key 1
for three seconds. After the countdown
“3-2-1”
on the
display,
“Wireless Connection”
symbol will disappear.
C
For the wireless connection to be enabled, initial setup of the HomeWhiz application must be completed. After the setup, if
you press the auxiliary function key 1 while the programme selection knob is in “Download Programme” position, wireless
connection will be enabled automatically.
4.3.9 End Time
Time display
While the programme is running, the time remaining to the end of the programme will be displayed in hours
and minutes, e.g. “01:30”.
C
Programme time may differ from the values in section "Programme and consumption table" depending on the water
pressure, water hardness and temperature, ambient temperature, amount and the type of laundry, auxiliary functions selected
and the changes in the mains voltage.
With the
End Time
function, start of the programme can be delayed up to 24 hours. After pressing
End Time
button,
the programme's estimated end time will be displayed. If the
End Time
is set,
End Time
indicator will turn on.
9
10
11
12
13
14
15
16
8
7
6
5
4
3
2
1
Summary of Contents for GWN 48442 C
Page 72: ......
