17
Configure Date & Time
In this menu you can set the Date, Time, Date format, time format,
time zone, NTP and DST.
Go to
Setup
>
System
>
General > Date and Time.
Click onto the calendar icon to set the system date.
In the Time field you can set the system time.
Choose from the drop-down menu the date format.
Choose the 24h or 12h time format.
The NTP (Network Time Protocol) settings option allows you
to synchronize the date and time automatically from a time
server from the internet. To use this option the NVR needs
to be online.
Click onto the DST-checkbox to enable the Daylight Saving
Time. Select the time offset and the DST mode. Finally set
the start and end time for daylight saving.
Click
Apply
.
Add IP Cameras
Before you can get live video or record the video files, you should
add network cameras to the device.
Before you start
Ensure the network connection is valid and correct, and the IP
camera to add has already been activated. Please refer to the
User
Manual
for activating the inactive IP camera.
There are two options to add cameras to the NVR:
1.
Auto (supported from NVR with internal switch only)
2.
Manual
3.8.1 Auto
Connect an IP-camera to a PoE-port of the NVR. The recorder will
detect the camera automatically and assign an internal IP-address to
the it.
