49 / 60 EN
Dryer / User Manual
Selecting a program and operating your machine
Child-proof Lock is active.
In order to activate the Childproof Lock, press
Audio Warning and Child-proof Lock button
for 3 seconds.
To start a new programme after the current
programme is over or to interrupt the current
programme, the Child-proof Lock should
be deactivated. Press the same button for 3
seconds again
to deactivate the child-
proof Lock.
C
Childproof lock warning indicator
will appear on the display when the
Childproof Lock is activated.
C
Child-proof Lock is deactivated when
the machine is switched off and on
with
on/off/cancel
button.
When the Child-proof Lock is activated:
Display symbols will not change even if the
position of Programme Selection knob is
changed while the machine is running or in
halt.
5.9 changing the programme
after it has started
After the machine starts, you can change the
selected programme and dry your laundry in
a different programme.
1. If you want to select Extra Dry programme
instead of Iron Dry programme, press
and hold the
Start / Pause
button for 1
second to stop the programme.
2. Select Extra Dry programme by turning
the Programme Selection knob.
3. Press the
Start/Pause
button to resume
the program.
Adding / removing laundry in Pause
mode
In order to add or take out laundry after the
drying programme has started:
1. Press
Start/Pause
button to switch the
machine to
Pause
mode. Drying process
will pause.
2. While in
Pause
mode, open the loading
door, add or take out laundry and close
the loading door.
3. Press the
Start/Pause
button to resume
the program.
C
Any laundry added after the drying
process has started may cause the
clothes that are already dried in the
machine intermingle with wet clothes
and the result will be wet laundry after
the drying process is over.
C
You may repeat laundry adding
or removing process as many
times as you desire during drying.
However, this process will increase
the programme time and energy
consumption since the drying process
will be interrupted repeatedly.
Therefore, it is recommended to add
laundry before the drying programme
has started.
C
If you select a new programme by
turning the Programme Selection knob
while your machine is in Pause mode,
then the current program is aborted
and new programme information is
displayed.
cAUTIoN:
Do not touch the inner
surface of the drum when adding or
taking out laundry while a programme
is running. Surfaces of the drum are
hot.
5.10 canceling the programme
If you want to stop drying and cancel the
programme for any reason after the machine
has started to run, press and hold the
on/
off/cancel
button for 3 seconds.
A
cAUTIoN:
As the inside of the
machine will be excessively hot
when you cancel the program while
the machine is running, activate the
ventilation program to cool it down.
