- 6 -
HADA 5100 SPTS
The cassette is controlled with the head-end station control unit.
The LEDs for the LAN interface show whether a network connection exists and
whether a data transfer is in progress.
When the head-end station is switched on, the two-line LC display shows the
software version of the control unit.
To operate this cassette the software version of the control unit must be "V 45"
or higher. You can find the current operating software for the control unit and
the cassette, the software "BE-Flash" and the current assembly instructions on
the website "www.mygss.eu".
The cassette is intended for use in the STANDARD LINE head-end stations.
Five LEDs (
6
,
8
,
0
,
@
,
$
) indicate by their colour whether an input
signal is present:
LED colour
Indication
Green
Signal present
Red
no Signal
1 2 3
$
%
^
@ #
9 0 !
7 8
5 6
4
2.5 s
oft ware
query
Control unit
If necessary, you can activate the indication of the software version of the
control unit manually:
• Press any two keys on the control unit of the head-end station simultaneously
until the display goes dark and the software version, e.g. "V 45" appears.
Cassette
After activating the cassette the software version of the cassette is displayed
(see page 13).
