- 13 -
DSI 400
4.3 o
Per ating
v
oltage
• Connect the power supply unit to a power point and then connect it to the
power supply socket
8
.
5
i
nitial
oPeration
—> A DHCP server must be activated in your network (normally inte-
grated in the router and active). The DHCP server must not be deac-
tivated, so that an IP address can be assigned to the DSI 400.
• Switch on the DSI 400 by the power switch
9
, which is located at the rear
side.
The DSI 400 logs in to the network and obtains an IP address from the
DHCP server (LAN operating indicator
!
blinks).
Once the connection is established, the LAN operating indicator lights per-
manently.
The DSI 400 is ready for operation and must now even be configurated
(only at initial operation).
