20 /35 EN
Refrigerator / User Guide
20
Using the product
1. Wireless Key
This key is used to make a wireless
connection with your product via
HomeWhiz mobile app.
When the key is pressed for a long period
(3 seconds), the wireless connection
symbol on the display/screen flashes
slowly (with intervals of 0.5 seconds).
The home network is initialized on the
product this way.
After achieving wireless connection with
the product, wireless connection symbol
(
) illuminates continuously.
When the initial connection is
established, you may activate/deactivate
the connection with a short press
on this key. The wireless connection
symbol shall flash quickly (at 0.2
second intervals) until the connection
is established. When the connection is
active, the wireless network symbol shall
light up continuously.
If the connection cannot be established
for a long period, check your
connection settings and refer to the
“Troubleshooting” section provided in the
user manual.
HomeWhiz application shall be used for
wireless connection. Installation steps
are described on the application during
installation.
You may access the application by
reading the QR code available on
the HomeWhiz label on the product.
Application is offered through App Store
for IOS devices, and through Play Store
for Android devices.
Visit https://www.homewhiz.com/ for
detailed information.’
2. Quick Freezing Key
When the quick freeze key is pressed, the
LED on the key is illuminated and the quick
freeze function shall be activated. Freezing
compartment temperature is set to -27
Celcius. Press the key again to cancel
function. The quick freezing function shall
be automatically cancelled after 24 hours.
To freeze a large amount of fresh food,
press the quick freeze key before placing
the food in the freezer compartment.
3. Fault Condition Indicator
This indicator (
) shall be active
when your refrigerator cannot perform
adequate cooling or in case of any
sensor error. “E” shall be displayed on
the Freezing Compartment temperature
indicator and figures such as 1,2,3...
shall be displayed on the cooling
compartment temperature indicator.
These figures provide information to the
authorized service on the error that has
occurred.
Exclamation mark may be displayed
when you load warm food to the freezing
compartment or keep the door open for
a long period of time. This is not a fault,
this warning shall be removed when the
food is cooled down or when any key is
pressed.
4. Energy Saving (Display Off) Indicator
Energy saving function is enabled
automatically and the energy saving
symbol (
) is displayed when the
door of the product is not opened or
closed for some period of time. When
the energy saving function is active, all
symbols on the screen other than the
energy saving symbol shall be turned
off. When the energy-saving function is
active, pressing any key or opening the
door will deactivate the energy-saving
function and the display signals will
