Grundig GSB 120, User Manual

Page: 7 / 11

7­ ENGLISH
Connecting­the­power­adapter
Note:­
7
Check that the mains voltage on the type
plate on the bottom of the device corre-
sponds to your local mains supply.
If this is not the case, contact your spe-
cialist dealer.
1 Connect the single plug of the power adapter
into the » DC­IN­9­V « socket.
2
Connect the power adapter into the wall sock-
et.
Caution:
7
The device is connected to the mains with
the power cord. Pull out the power adapter
if you want to completely disconnect the de-
vice from the mains.
7
Make sure the power adapter is easily ac-
cessible during operation and not hindered
by other objects.
Charging­the­device
1
The power adapter to the device will automat-
ic recharge the internal rechargeable battery.
– The charging indicator illuminate “red“
while the device is charging and disappear
when the device is fully charged.
Notes:
7
Charge the unit for about 4 hours.
7
When the device is switched on and is not
connected to the power supply via the net-
work adapter, the Bluetooth display informs
you when the battery is empty (display red).
Using­and­maintaining­your­­
rechargeable­battery
7
The battery must be charged at least 4 hours
prior to first use.
7
For long period of storage, please recharge
the battery at least once every two months to
maintain the battery in optimum condition.
7
Once the battery is fully discharged, immedi-
ately recharge regardless of whether you plan
to use the battery or not in order to maximize
battery life.
CONNECTION­AND­PREPARATION
­____________________
7
Recharge efficiency will degrade when envi-
ronmental temperatures drop below 5°C or
exceed 35°C.
Warning:
7
Do not expose the battery to temperatures
in excess of 45C.
Connecting­external­devices
Note:­
7
Switch the device off before you connect
external devices.
1 Use a standard audio adapter to connect the
audio outputs of the external device to the
»
AUX­IN
« (ø 3.5 mm) socket.
Notes:­
7
The GBS 120 will auto-switch into AUX IN
mode from Bluetooth mode after insert AUX
IN cable to the device.
7
If want to back to Bluetooth mode, please
remove AUX IN cable from the »
AUX­IN
«
socket.