background image

4

DISHWASHER / USER INSTRUCTIONS

/43 EN

INSTRUCTIONS FOR SAFETY AND ENVIRONMENT

1

This section contains safety 

instructions that will help to give 

protection from risk of personal 

injury or property damage. Failure 

to follow these instructions shall 

void all warranties.

General safety

 

Never place the product 

on a carpet-covered floor; 

otherwise, lack of airflow 

beneath the product will cause 

electrical parts to overheat. 

This will cause problems with 

your product.

 

Do not operate the product 

if the power cable / plug is 

damaged! Call the Authorised 

Service Agent.

 

Connect the product to a 

grounded outlet protected 

by a fuse complying with 

the values in the “Technical 

specifications” table. Do 

not neglect to have the 

grounding installation made 

by a qualified electrician. 

Our company shall not be 

liable for any damages that 

will arise when the product 

is used without grounding in 

accordance with the local 

regulations.

 

The water supply and 

draining hoses must be 

securely fastened and remain 

undamaged.

 

Unplug the product when not 

in use.

 

Never wash the product by 

spreading or pouring water 

onto it! There is the risk of 

electric shock!

 

Never touch the plug with 

wet hands! Never unplug by 

pulling on the cable, always 

pull out by grabbing the plug.

 

The product must be 

unplugged during installation, 

maintenance, cleaning and 

repairing procedures.

 

Always have the repair 

procedures carried out by the 

Authorised Service Agent. 

Manufacturer shall not be held 

liable for damages that may 

arise from procedures carried 

out by unauthorised persons.

 

Never use chemical solvents in 

the product. They bring forth 

the risk of explosion. 

 

When you pull the upper and 

lower baskets out completely, 

the door of the product will 

bear all the weight of the 

baskets. Do not put other 

loads on the door; otherwise, 

the product may tilt.

 

Never leave the door of the 

product open apart from 

loading and unloading 

procedures.

 

Do not to open the door of 

the product when it is running 

unless necessary. Be careful 

for the rush of hot steam when 

you need to open the door.

Intended use

 

This product has been 

designed for domestic use.

 

It must be used to do the 

domestic type dishes only.

 

This appliance is intended 

to be used in household and 

similar applications such as:

Summary of Contents for GNF41821W













































Reviews: