ENGLISH
55
Preparing for recording
1
Switch on the television and select the preset channel for the
HDD DVD recorder.
2
Press »
Ǽ
« to switch on the HDD DVD recorder from standby
mode.
3
Briefly press »
ə
« on the HDD DVD recorder or press and hold
down »
7
« on the remote control.
– Display: »
«, the disc compartment opens.
4
Put a disc in the disc compartment with the label facing
upwards.
5
Press »
ə
« on the HDD DVD recorder or press and hold down
»
7
« on the remote control.
Recording from a satellite receiver:
If the television programme is being recorded from a satellite
receiver, switch on the satellite receiver and select the satellite
channel you want.
Select the channel position »EURO-AV 2« for the satellite receiver
on the HDD DVD recorder with »
SOURCE
« or »
0
« (AV).
Manually recording television programmes
1
When you switch on the HDD DVD recorder, the current pro-
gramme that you can see on the television screen is recorded in
the time shift memory.
2
Switch to disc mode by pressing »
« (blue).
– A message is displayed to quit
timeshift mode by pressing »
OK
«.
– Afterwards the disc type, the selected recording quality, the
current and remaining playing time available (depending on
the recording quality) are displayed.
3
Press »
SOURCE
« to select the input source (for example, TV).
– Display: for example, »P1 BBC«, the current TV station is shown.
4
Press »
A
« or »
S
« or use the numerical buttons »
1…0
« to
select the TV channel or open the programme list with »
OK
«,
press »
A
« or »
S
« to select the TV channel and switch off the
programme list with »
x
«.
Note:
If you want to change the preset recording quality, press
»
Q-SET
« until the quality you want appears in the display.
RECORDING ON DISC___________________
Select
and
Choose
Sys state:
STOP
Record To
Optical Disc
as
(25min/GB)
Elapsed Time:
00:00:00
Remain Space:
02:05:00
DVD Target
Record
HDD
DVD
HDD Target
Exit
