EN
GLISH
17
Connecting a digital multi-channel amplifier or
digital two-channel audio system
The digital multi-channel sound of a DVD can best be decoded and
played back with a multi-channel audio/video amplifier (Dolby*
digital decoder or DTS**).
1
Plug a standard RCA cable into the »
DIGITAL AUDIO OUT
«
of the DVD player and into the corresponding socket on the
digital multi-channel amplifier;
or
remove the protective cap of the optical digital output and plug
an optical digital cable into the »
DIGITAL AUDIO OUT
« so-
cket of the DVD player and into the corresponding socket of
the digital multi-channel amplifier.
Notes:
Keep the protective cap in a safe place and replace it on the
device if it is not to be used for a longer period of time.
Even if you are using a digital connection, you should still make
an analogue audio connection as it is possible, depending on
the disc type, that the signal cannot be output via the »
DIGI-
TAL AUDIO OUT
« socket (see page 18 for connection).
* Manufactured under licence from Dolby Laboratories Licensing Corporation.
“Dolby”, “Dolby Pro Logic”, “Dolby Digital” and the double-D symbol “
g
“
are trademarks of the Dolby Laboratories Licensing Corporation. Copyright
1992 Dolby Laboratories, Inc. All rights reserved.
** DTS and DTS Digital Out are trademarks of Digital Theater Systems, Inc. All
rights reserved.
CONNECTION/PREPARATION
__________
Optional
Summary of Contents for GDP 3760
Page 1: ...DVD PLAYER GDP 3760 ...
