1. Important Safety Instructions
Make sure that you only use the power adapter that is specified in
the specifications sheet of the product. If you use any other adapter
or connect the power supply incorrectly, this may cause explosion,
fire, electric shocks or damage the product. Do not connect several
devices to one power adapter as this may cause an adapter
overload and can lead to over-heating and fire. Make sure that the
plug of the power adapter is firmly connected to the power socket.
Do not place containers with liquids on the product. Do not place
conducting items like tools, screws, coins or other metal items on
the product. These may fall from the product or can cause fire or
electric shocks or other physical injuries.
Do not push or insert any sharp items or any objects into the device
as this may cause damage to the product, fire, electric shocks
and/or physical injuries.
Do not block any ventilation openings, if there are any. Ensure that
the product is well ventilated to prevent any over-heating.
Do not subject the device to physical shock or drop the product.
If the product uses batteries, please use a battery type that is
recommended by the manufacturer. Improper use or replacement
of the battery may result in the hazard of explosion.
Do not use any accessories that are not recommended by GRUNDIG.
Do not modify the product in any way.
If the product starts to smell or smoke comes out of the device,
immediately stop using the product and disconnect it from the
power supply to prevent fire or electric shocks. Then contact your
dealer or the nearest service center.
If the product does not work correctly, contact your dealer or
nearest service center. Never open, disassemble or alter the
product yourself. GRUNDIG cannot accept any liability or
responsibility for problems caused by attempted and unauthorized
repair and maintenance.
2. Installation Instructions
It is necessary to fix the device firmly if the product is installed on a
wall or ceiling.
Do not install the product near radiation sources. Do not install the
product near heat sources, like radiators or other equipment that
produces some heat.
Do not install the product in very cold or hot temperatures (please
refer to the working temperature specified in the specification
sheet of the product), dusty, dirty or damp environment.
Never touch the screen directly with your fingers. The acidic sweat
of the fingers may be difficult to remove and you may damage the
screen.
Do not touch the surface of the screen with sharp or abrasive items
(like pens or screwdrivers), as this could scratch the display.
The monitor is only for indoor use. Please do not install it in an
environment where it is exposed to oil, vapor, steam, moisture and
dust, but in a clean environment with low humidity.
3
2
