10
4
General
4.1 Mounting
Check the power supply. The working voltage should be 100 VAC-240
VAC, 35 W.
Check if the desk is horizontal.
Mount the device on the desk or a tripod in front of the thermal
camera firmly. The distance to the camera is depending on the
camera model. Make sure that the front of black body can show in
the live view of thermal camera completely, and outside the
temperature measurement area.
Switch on the device, and the power indicator is on. The factory
default setting temperature is 40 °C.
4.2 Operation
Connect the black body with a 10 A socket via the power cable.
Switch on the device, and the power indicator is on. The factory
default setting temperature is 40 °C.
Wait for 30 minutes after switching on device. You can calibrate the
thermal camera when the temperature is stable at 40 °C.
Switch off the black body and store it after use.
