Grundig GCT-K2326D, Owner'S Manual

Page: 14 / 18

6.8. MOTION
This function is used to detect moving
objects in the monitored area.
> SENSITIVITY [0~20]: Set the sensitivity of the motion detection.
> WINDOW TONE [0~6]: Here you can set up the tone of the mask area.
> WINDOW USE [0~3]: Here you can set up the zone of the mask area.
> WINDOW ZONE [ON, OFF]: Here you can set the usage of the mask area to ON or
OFF.
> DET H-POS [0~60]: Moves the Detect area horizontally.
> DET V-POS [0~34]: Moves the Detect area vertically.
> DET H-SIZE [0~60]: Defines the horizontal size of the Detect area.
> DET V-SIZE [0~34]: Defines the vertical size of the Detect area.
> ALARM [ON, OFF]: This function is not available.
NOTE: After the area setting is done, you can change back the WINDOW TONE to ‘0’
so that the border does not show. Setting the area to Full screen is highly recommended.
6.9. SYSTEM
Here you can configure camera related
functions and data.
COM.:
No function in this camera model.
12 English