9.14. Factory Default
The factory default setting page is shown below. Follow the instructions to reset the IP Camera to factory default
setting if needed.
Full Restore :
Click on the “Full Restore” button to recall the factory default settings. After 30 seconds the system will restart.
NOTE: The IP address will also be restored to default (192.168.1.1).
Partial Restore :
Click on the “Partial Restore” button to recall the factory default settings, except for the network settings.
Reboot :
When you click on the “Reboot” button, the system will restart without changing the current settings.
71
English
Summary of Contents for GCI-K1677D
Page 2: ......
