Grundig GCH-K1305B-1, Owner'S Manual

Page: 7 / 21

5. OSD Control
- Pressing the SET UP stick: Accesses the menu mode or confirms the setting.
- UP / DOWN: Chooses the desired menu.
- LEFT / RIGHT: Sets up the value of the selected menu and changes the settings.
6. OSD Menu
1. Press the SET UP stick to access the menu mode.
2. Select the desired feature by using the UP/DOWN direction (/\ \/) of the SET UP stick.
If an ENTER arrow (
↵
) is displayed next to the feature, press the SET UP stick to access
the feature's menu.
3. If there is a setting for this feature on the right side of the screen, use the
LEFT/RIGHT direction to switch between the settings and confirm your choice by
pressing the SET UP stick.
4. When the settings are completed, go to EXIT to save and leave the OSD.
PRESET MODE [INDOOR, OUTDOOR, LOWLIGHT, HALLWAY, LOBBY, ELEVATOR]:
Select between the preconfigured setup modes. These settings can be further modified
in the MENU SETUP menu.
MENU SETUP:
If you choose this item, a submenu will
appear (see the picture on the left). Here
you can configure all camera settings. This
is the Main Menu.
Please see the following sub-chapters for
further explanations of the settings.
5 English