Grundig GCA-B3323V, Owner'S Manual

Page: 5 / 25

3. Package Contents
These parts are included:
- Torx Wrench: Length 90mm (1pc)
- Dowel: Length 30mm, Thickness 6mm (4pcs)
- Assembly Screws: FH M4x14 (4pcs)
- Mounting Screws: ST4x38 (4pcs)
These screws are used to mount both surface mount plate or flush mount base to a
sturdy surface. If necessary, use the dowels included.
- Pipe Cap Driver: (1pc)
This is used to open/close the pipe cap of the surface mount plate.
- Service monitor and control cable:
It is possible to set up the camera through a portable monitor and adjust the OSD menu
of the camera externally.
4. Installation
Do not install the product in a location subject to high temperature (over 50°C), low
temperature (below -10°C), or high humidity. Doing so may cause fire or electric shock.
Keep out of direct sunlight and heat radiation sources. This may cause fire. Avoid aiming
the camera directly towards extremely bright objects such as the sun, as this may
damage the image sensor.
Do not install the unit in humid, dusty or sooty locations. Doing so may cause fire or
electric shock. Install it in a place with good ventilation.
3 English