•
The equipment meets the requirements of the EU guideline on
Electromagnetic Compatibility (EMC) 89/336/EEC.
Battery installation / replacement
Holding the trimmer upside down. Rotate the battery cover
counterclockwise until the cover unlocks from the unit.
Insert one AA alkaline battery compartment, positive side up.
Replace the battery cover and turn clockwise to snap into place.
To avoid pulling of hairs, replace battery when it begins to get weak.
! Do not dispose of used batteries with hose-hold rubbish.
Take used batteries to a convenient collection point.
Trimming operation
Remove the protecting cap by pulling it from the unit. Switch the
trimmer on.
Trimming nose hair
Make sure nasal passages are clean. Slowly
move the cutting head in and out, of each
nostril to remove unwanted hair.
Caution: Do not insert tip more the 0.5 cm into nostril. For
best results, make sure the side of the tip is firm against skin.
T
his will reduce the tickling effect that can occur.
