ENGLISH 23
8
Adjust the camera position onto
the mounting bracket and tighten
the safety screw (
A
).
(
A
)
9
Plug the DC 12V adaptor to the
wall socket.
– Operation LED lights up soon
and the camera tests the motors
automatically.
10
Connect the LAN cable to an
unused socket on the modem or
router.
Warning:
7
Do not connect the camera to
the LAN input of the television
set. Camera and television
should be connected to each
other over modem or router as
to be on the same network.
Notes:
7
Remove the lens cover.
7
Adjust the camera to the obser-
vation position by using the but-
tons on the remote control.
7
See Adjusting Sharpness sec-
tion on page 27 to adjust image
sharpness.
4
Drill the holes on the wall and
insert the given plugs into these
holes.
5
Fix the mounting bracket with the
4 supplied screws to the wall.
6
For the WLAN operation, screw
the WLAN antenna onto the de-
vice;
or
for LAN operation, connect the
LAN cable to the »
Ethernet
«
socket.
Note:
7
LAN cable is supplied with the
device.
7
Plug the power cable to the
»
DC12V
« socket.
ASSEMBLYANDCONNECTION
___________
