Brake handle
2.2 Pre-assembly instructions
Function button
Speed rate
Multifunction
Gear
Maintenance
display
Power
Power switch
LCD Display
Throttle button
LCD display
1.Pull up the lever while pressing
down the rear wheel fender
2.Raise the pole, fasten the folding
spanner, and use the folder fixing
ring to fix the folder wrench.
3.Fix the brake lever with M6 hex
wrench.
Instructions of Buttons
1
2
3
4
Switch: long press the power button to turn on/off the power;
Acceleration: press the right acceleration button to start and accelerate;
Brake: hold the brake handle to brake. Lightly step on the rear fender to assist braking.
Short press the function key to directly adjust the speed
Beginner mode: no characters in the gear position
Normal mode: gear logo displayed in white
Sports mode: gear logo displayed in red
5.If the pole is shaky, adjust the 4. Tighten handlebars (Paying attention
Folding wrench with a screw to the direction of rotation)
5
6
Headlights: Press the function button twice quickly to turn on the headlight and the taillight.
In the light-on state, press the function button twice quickly to turn off the headlight and taillight;
Cruise mode: keep the current speed for 6 seconds to enter the cruise mode;
Exit the cruise mode by pressing accelerator button again or hit the brake.
25
26
Speed
measurement
