Grundig FS 4820, Manual

Page: 23 / 129

ENGLISH 23
Note
7
The LO, HI and PU (»pulse«) set­
tings are based on the original
duration of 10 minutes, as long
as the timer setting has not been
changed.
3
Select the timer setting with
» « (5, 10 up to maximum of
30 minutes).
Note
7
Once the set time has elapsed, a
signal tone is emitted three times.
4 Press »8« to switch off the ap­
pliance after use.
5 Disconnect the power cord
from the wall socket.
Important note
7
It is advisable to use the LO =
low temperature level. Too hot
steam could cause injury to your
face.
7
Do not hold your face too near
to the mask.
7
We recommend using the
appliance for not longer than 20
minutes per day and not more
than two or three times a week.
7
You can stop the treatment at
any time, by pressing » 8 « to
switch off.
3 Put the face mask on the basic
appliance and turn to tighten
clockwise.
close open
4
Plug the power cord into the wall
socket.
Note
7
For the maximum amount of
water, the steam takes about
20 minutes to develop.
Use
1 Press the » 8 « button to switch
on the appliance.
7
The appliance starts at the lowest
temperature level which takes 10
minutes to reach as long as the
timer setting has not been chan­
ged.
2
Select the required tempera­
ture level with » « (LO = low,
HI = high and PU = pulse hig­
her and lower temperatures).
USING WITH THE FACE MASK
­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­­