Grundig DTR 6000 2.1 BT DAB+ WEB, User Manual

Page: 35 / 68

ENGLISH 34­ ­
SETTINGS
­---------------------------------------------------------------------------------------------------------------------------------------
7
If you wish to exit the menu prematurely,
press » «, » «, » « or » « or by turning
the Volume Knob to select the push button
»CANCEL« and press »
OK « to confirm.
16
Press »
OK
« to end the setting.
Setting­DAB­stations
Automatic­station­search
If you first switch on the device in DAB mode, the
automatic station search starts.
During the search, the first line shows the num-
ber of stations found, and the second shows the
search scale.
After the end of the search, an alphanumeric ar-
rangement of stations appears. If no stations are
found, the DAB menu appears in the display.
1
To enter DAB mode, either press »
Menu/
INFO « button --> select “Main menu” --> DAB
or press » MODE « button then turn the Volume
knob clockwise or anticlockwise to scroll left or
right through the mode list until DAB Radio is
highlighted and press »
OK «.
Note:
7
In the »DAB Radio« – »Full scan« menu, you
can restart a new “Automatic station search”.
This may be necessary when the location of
the device is changed.
Sorting­channels
You can sort the station list stored during the sta-
tion search in three different ways.
– »Alphanumeric«: all stations are sorted alpha-
numerically (default setting).
– »Ensemble«: all stations are sorted by ensemble.
– »Valid«: active stations are listed first, stations
that are not active are shown with a question
mark.
1 Press » MENU « to open the DAB menu.
2 Select the option »Station order« by pressing
» « or » « or by turning the Volume Knob
and confirm by pressing »
OK «.
3
Select your settings by pressing » « or » «
or by turning the Volume Knob and confirm by
pressing »
OK «.
Setting­FM­stations
Setting­the­search­mode
There are two different automatic scan setting
modes.
1 To enter FM mode, either press » Menu « but-
ton --> select “Main menu” --> FM or press
»
MODE « button then turn the Volume knob
clockwise or anticlockwise to scroll left or right
through the mode list until FM Radio is high-
lighted and press »
OK «.
2 Press » MENU « to open the »FM« menu.
3 Select the option »Scan setting« by pressing
» « or » « or by turning the Volume Knob
and confirm by pressing »
OK
«.
– Display: »Strong stations only?«.
4 Select your setting (»YES« or »NO«) using
» « or » « or by turning the Volume Knob and
confirm by pressing »
OK
«.
5­ Press » MENU « to end the setting.
Automatic­station­search
1
Press and hold » « or » « or press the Volume
Knob. When you release the button, the auto-
matic search stops at the next station.
Note:
7
Press Menu button and select the option
»
ATS
« and confirm by pressing »
OK
«. Se-
lect the option »YES« and confirm by press-
ing »
OK «. The automatic station search
starts, searches and stores the radio stations.
Tuning­stations­manually
1 Move the frequency forward in brief steps by
repeatedly pressing » « or » «.
– The frequency goes up or down in 50 kHz
steps.