ENGLISH
27
Setting the clock
When the device is switched on for the first time, »
0 : =0
« appears in the dis-
play to indicate that the time must be set. The same applies if the device has
been disconnected from the mains and no back-up battery is inserted.
1
Set the sliding switches for the alarm function»
e
1 OFF ON ADJ
«
and »
e
2 OFF ON ADJ
« to »
OFF
«.
2
Press »
TIME SET
« and hold it down.
– Display: the time flashes.
3
Press »
SKIP
4
I
« briefly to set the hours step-by-step or hold it down
to run through the minutes quickly.
4
Press »
I
3
SKIP
« briefly to set the minutes step-by-step or hold it
down to run through the minutes quickly.
Note:
When the minute display changes from »
59
« to »
00
«, this does not
affect the hour display.
5
Release »
TIME SET
« to conclude the setting.
– Display: the current time.
Setting the alarm times
With this device you can set two alarm times.
1
Set the sliding switch »
e
1 OFF ON ADJ
« (left side of the device) to
»
ADJ
«.
– Display: the last alarm time set flashes.
2
Press »
SKIP
4
I
« (top of the device) briefly to set the hours
step-by-step or hold down to run through the hours continuously.
3
Press »
I
3
SKIP
« (top of the device) briefly to set the minutes
step-by-step or hold down to run through the hours continuously.
4
To end the setting set the sliding switch »
e
1 OFF ON ADJ
« (on the
left side of the device) to »
ON
«.
– Display: the LED »
e
1
•
« glows, i.e. the alarm setting with alarm
time 1 is activated.
5
To set alarm time 2, repeat steps
1
to
4
with the sliding switch
»
e
2 OFF ON ADJ
« (left side of the device).
– Display: the LED »
e
2
•
« glows, i.e. the alarm setting with alarm
time 2 is set.
SETTINGS
______________________________________________
